Engagement Ring, Trilogy
Tim Swann
Platinum Crossover Round Brilliant Cut Diamond ...
Platinum Crossover Round Brilliant Cut Diamond and Emerald Engagement Ring
Engagement Ring, Halo, Cluster
Tim Swann
Platinum Round Diamond Halo Engagement Ring
Platinum Round Diamond Halo Engagement Ring
Engagement Ring, Halo, Cluster
Tim Swann
18ct Yellow Gold Oval Cut Emerald and Diamond ...
18ct Yellow Gold Oval Cut Emerald and Diamond Halo Engagement Ring
Engagement Ring
Tim Swann
18ct Rose Gold Diamond Halo Tourmaline ...
18ct Rose Gold Diamond Halo Tourmaline Engagement Ring
Engagement Ring
Tim Swann
9ct Yellow Gold Baguette Diamond Halo ...
9ct Yellow Gold Baguette Diamond Halo Engagement Ring

Trilogy

,

Sapphire and Diamond Trilogy Engagement Ring

,

A beautiful example of a traditional and modern engagement ring design using sapphire and diamond.

This trilogy combination, with a sapphire centre stone flanked by two diamonds, is a really beautifully classic style. With this engagement ring we've then added a contemporary twist with the designing of the mount.

Where most other rings have two bezels under the stones we have made this with just one. Creating it this way allows you to see much more of the sapphire and diamonds whilst still being able to keep the stones quite low.

We always try our best to show off the stones from as many angles as possible to allow as much light into them and create extra sparkle.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

Yellow Gold Diamond and Peridot Engagement Ring

,

Metal: Yellow Gold

Stones: Princess Cut Diamond, Princess Cut Peridots

Style: Trilogy

A bespoke yellow gold diamond and peridot engagement ring.

This is a lovely example of a colourful trilogy engagement ring. A bold, princess cut diamond sits at the centre of the design with two bright green peridots on either side of it. All the stones have been hand set in neat four claw settings. The settings also showcase a beautiful basket detail which hold the stones proudly above the shank of the ring.

The customer chose for the ring to be cast in 18ct yellow gold. A lovely decision which brings a warm tone to the whole piece.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

Platinum Sapphire and Diamond Trilogy Engagement Ring

,

A stunning trilogy engagement ring, cast in platinum and set with sapphire and diamonds.

The customer had their perfect design in mind when they came to see our expert jewellers in Chapel Allerton, Leeds. They were looking for a colourful trilogy with stylish details and interesting diamond cuts. 

After sourcing a selection of coloured precious stones for the customer to view, they chose this fabulous bright blue, round brilliant cut sapphire. This would be their centre stone to be flanked by two diamonds. They selected two matching pear cut diamonds. A beautiful and well balanced combination.

The sapphire was claw set by hand and the diamonds were claw set on the inner edges to match. The point of the oval cut diamond was set with a stylised setting to protect it whilst also adding a trendy design detail. 

The shank of the ring also had a stylish knife-edge detail and the ring was cast in platinum.

The customer was thrilled and loved their bright and bold twist on a classic trilogy engagement ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

Emerald and Diamond Trilogy Engagement Ring

,

A bespoke trilogy engagement ring with emerald and diamond.

The customer came to Form Bespoke Jewellers for help with a secret proposal. They knew that they wanted to create a special bespoke design that would feature an emerald and twist detailing on the shoulders, but wanted advice on how best to pull all their ideas together to create the perfect engagement ring.

With the guidance of our expert jewellers, it was decided that it would be a trilogy engagement ring with an emerald centre stone and diamonds either side; that they would be claw set in a pretty criss-cross setting; and that there would be a twisted band with a comfort fit at the bottom. The design was then created on CAD for the customer to see as a more 3D design, and once approved it was then sent to the casters to be cast in Platinum. Platinum was chosen for it’s hardy high quality.

A selection of emeralds were sourced for the customer to choose from of varying colour and clarity, and they chose this bright green round brilliant cut emerald. Two round brilliant cut diamonds of matching colour and clarity were then chosen to flank the coloured precious stone.

When the customer came to collect their bespoke engagement ring they were blown away! “To Tim & Gary, thanks so much for all your help in making the perfect ring for a perfect day. The piece is absolutely fantastic and I couldn’t have wished for anything more”

His now-fiancée also sent us a thank you card: “I just wanted to say a huge thank you – my engagement ring is absolutely perfect! Not only are the amazing jewellers at Form highly skilled craftsmen, but they are thoughtful, friendly and professional (and very good at keeping a secret engagement under wraps!). My now-fiancé designed my unique engagement ring alongside their expert guidance, and it is even more beautiful than I could have ever imagined. The twisted band, delicate setting and amazing emerald centre stone flanked by diamonds is simply stunning! I can’t believe I have a bespoke engagement ring, hand made just for me! I feel very lucky. Thank you so much. I will be recommending Form Bespoke Jewellers over and over again.”

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

Palladium Black Diamond Trilogy Engagement Ring

,

A bold and beautiful palladium trilogy engagement ring with black diamonds.

The customer visited our Yorkshire studio looking for an alternative twist on a traditional trilogy engagement ring. They wanted to make a statement using beautiful black diamonds.

Diamonds can come in many different colours including yellow, brown and pink. This time, the customer was looking for a dark, bold design and chose three black diamonds. One larger round brilliant cut black diamond was selected for the centre. It was then flanked by two smaller round brilliant cut black diamonds.

The diamonds were set by hand into a palladium four claw setting. This is a neat setting which really keeps the attention on these unique stones.

The customer chose to have their bespoke engagement ring cast in trendy palladium.

The band of this trilogy engagement ring was also given some extra design detail. The customer chose to have a scroll detail hand engraved on the shoulders. This very delicate pattern really helps to make this ring beautifully bespoke.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

Platinum Trilogy Sapphire and Diamond Engagement Ring

,

Emerald cut sapphires and diamonds make this such an elegant platinum engagement ring.

This classic trilogy setting is brought to life using sapphires and diamonds. The emerald cut stones taper elegantly to sit beautifully on the finger.

The diamond is a 1.08ct with a G colour and VS1 clarity (independently certified by the GIA).

The sapphires have a total weight of 0.82cts and are a lovely deep oxford blue colour.

Cast in platinum, this beautiful engagement ring was created, set and finished by the team at Form Bespoke Jewellers in Leeds.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

Pink Sapphire and Diamond Trilogy Engagement Ring

,

This engagement ring design just oozes romance with a pink sapphire and diamonds

The team at Form Bespoke Jewellers created this stunning three stone engagement ring with contemporary detailing to the side profile and claws.

The sweeping design cups the round brilliant cut 5mm pink sapphire centre stone and two 0.10 carat diamond outer stones, suspending them with the illusion of tension setting and allowing light to flood the facets in the stones.

The customer decided to have the ring cast in palladium which further adds to the contemporary finish of this beautiful engagement ring.

To find out more about palladium and other precious metals please read our guide to finding the right one for you.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us or further information on this ring or to see what we can make for you.

,

18ct White Gold Trilogy Three Diamond Ring

,

Created for the customers own diamonds

This customer came to Form Bespoke Jewellers with 3 diamonds that they wanted to have reset into a bespoke ring design.
After working with the customer to create the perfect design the team at Form Bespoke Jewellers created a model by hand which was then cast in 18ct white gold with a high palladium contact to ensure whiter natural colour. The customers diamonds were then set into the ring and finished by the team at Form Bespoke Jewellers at their Chapel Allerton studio in Leeds.

This ring is a beautiful example of how Form Bespoke Jewellers can help customers who want to breath new life into their old jewellery pieces.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Princess and Emerald Cut Diamond Trilogy Engagement Ring

,

Stunning bespoke engagement ring with princess and emerald cut diamonds.

The customer requested a truly unique engagement ring to be created by the team at Form Bespoke Jewellers. The contemporary shank defines the strong design and proportions of this design. 

Once the design had been approved it was cast into platinum and set with a 1.51 carat princess cut diamond centre stone of F colour and VS1 clarity. To to each side is set a 4.7mm x 3.4mm emerald cut diamond (with a combined weight of 0.62 carats) of matching colour and clarity.

This bespoke engagement ring was further personalised by adding the first initial of each of the couple into the setting along with a round brilliant cut diamond.

The customer also returned to us at Form Bespoke Jewellers for a perfectly shaped fitted wedding ring, created to sit against this beautiful engagement ring (shown at its pewter model stage on the image below).

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Trilogy Round Brilliant Cut Diamond Engagement Ring

,

Style: Trilogy

Metal: Palladium

Stones: Round Brilliant Cut Diamonds

A bespoke trilogy engagement ring with round brilliant cut diamonds.

This contemporary engagement showcases three round brilliant cut diamonds. Each one is of matching colour and clarity to the others and framed by a unique, bold setting. The setting also creates an illusion as though each diamond is suspended between the palladium pillars and allowing the whole depth of the diamond to be seen. This further enables lots of light to enter the diamonds, increasing their sparkle.

The width of the palladium band follows the width of the outer diamonds too, ensuring a neat and modern finish to the piece.

A trendy and bespoke, diamond trilogy engagement ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Tiffany Style Trilogy Diamond Engagement Ring

,

An elegant engagement ring with a trilogy of diamond cuts in a Tiffany Style setting.

The team at Form Bespoke Jewellers worked with the customer to develop a three stone engagement ring to feature a round brilliant cut diamond centre and a pear cut diamond set to each side, based on a design inspired by Tiffany.

A selection of diamonds was then brought in for the customer to choose from and they selected 0.48ct round brilliant cut diamond of H colour and VS1 clarity and a pair of pear cut diamonds of matching colour and clarity (with a combined diamond weight of 0.25ct for the pair). The combination of diamond cuts works perfectly together, whilst also elegantly flowing over the finger.

The final design was then created to fit the proportions of the selected diamonds perfectly and, once approved by the customer, was cast into platinum. The ring was hand set, finished and polished by the team at the Chapel Allerton workshop in Leeds.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Oval and Round Brilliant Cut Diamond Trilogy Engagement Ring

,

Metal: Platinum

Style: Trilogy

Stones: Oval Cut Diamond, Round Brilliant Cut Diamonds

A bespoke trilogy engagement ring with oval and round brilliant cut diamonds. 

At the centre of this beautiful design is a trilogy of sparkling diamonds; an oval cut diamond flanked by two round brilliant cut diamonds. All the diamonds are neatly claw set by hand in double bezel settings. This allows extra light to enter the diamond, creating more sparkle!

Then, to add an elegant design feature, the shoulders of the platinum band have a twisting illusion. 

A stunning diamond trilogy engagement ring with beautiful, bespoke details.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Engagement Ring Using Customers Own Round Brilliant Cut Diamonds

,

The customers own stones were used in this beautiful engagement ring.

The customer wanted to use the stones from a ring passed down to them in the family, and the team at Form Bespoke Jewellers in Leeds worked to create a contemporary ring complementing the stones beautifully.

The result was a modern and unique ring that carries on the family history to celebrate the couple's engagement.

Made by Form Bespoke Jewellers in Chapel Allerton, Leeds

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Platinum Princess & Pear Trilogy Diamond Engagement Ring

,

A stunning combination

This customer had seen a ring in Form Bespoke Jewellers collection which had been designed for another customer and took inspiration from it to create this beautiful design of a three stone ring featuring a princess cut diamond centre and pear cut diamonds.

A selection of princess cut diamonds and pear cut diamonds were brought in for the customer to view so that they could choose the best proportions to suit them and their budget. They selected a beautiful 0.48 carat princess cut diamond of D colour and VVS1 clarity, Certified by the GIA and a pair of 5mm x 3mm pear cut diamonds of matching colour and clarity, to be set either side with a combined diamond weight of 0.35 carats.

The team at Form Bespoke jewellers hand created this elegant ring which features square claw setting to compliment the shapes of the diamonds perfectly. The handmade model was then cast in platinum and hand set and finished by the team at Form Bespoke Jewellers in Leeds.

Made by Form Bespoke Jewellers in Chapel Allerton, Leeds

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Trilogy Asscher Cut Diamond Engagement Ring

,

A classic trilogy engagement ring style with beautiful asscher cut diamonds.

After visiting our expert jewellers in Chapel Allerton, Leeds, the customer decided on a beautiful asscher cut diamond (that we had sourced from one of our reputable contacts), and they decided on a trilogy style for their bespoke engagement ring.

The centre asscher cut diamond is 0.71 of a carat (and a G colour and VVS quality). We then contacted our diamond dealer again for a pair of asscher cut diamonds which would coordinate beautifully and flank the already selected centre diamond.

Two diamonds of .020 of a carat each (and a G colour and VS quality) were chosen to perfectly complete the trilogy set. All the diamonds were then set by hand into the platinum engagement ring which weighed just under 5 grams.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

White Gold Princess Cut Trilogy Engagement Ring

,

Style: Trilogy

Metal: 18ct White Gold

Stones: Princess Cut Diamonds

A contemporary princess cut trilogy engagement ring cast in 18ct white gold.

This bold and modern engagement ring boasts a three princess cut diamonds at its centre. Impressively hand set in a semi-rub setting, it allows extra light to flood almost all of the diamond. This in turn creates a super sparkle! It is also a real treat to see the cullet (the point) of the diamond from the side.

The customer chose for their stunning trilogy engagement ring to be cast it 18ct white gold to finish of the contemporary look beautifully.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

18ct White Gold Ring Using Customers Own Diamonds

,

The customers' own stones are reset in a new design to create a modern fresh engagement ring by the team at Form Bespoke Jewellers

The customer came to us wanting to use stones from a ring they already had, set in a design that reflected their style. The team at Form Bespoke Jewellers created a ring that compliments the stones and the couples' style perfectly.

The diamonds are set in 18ct White Gold high palladium.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Trilogy Emerald Cut Diamond Engagement Ring

,

An elegant trilogy engagement ring with emerald cut diamonds.

This lovely engagement ring showcases three stunning emerald cut diamonds.

The claw setting allows for the diamonds to be seen from the side and for more light to be let in, in turn creating lots of sparkle.

The diamonds are set into a palladium band which really compliments the trilogy styling.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Trilogy Princess Cut Diamond Engagement Ring

,

An elegant trilogy engagement ring design with princess cut diamonds.

The customer was inspired by a design they had seen in the Form Bespoke Jewellers Chapel Allerton showroom and chose to have it cast in platinum.

A selection of diamonds were brought in for the customer to view and they chose a 0.50 carat princess cut diamond centre stone (of E colour and VS1 clarity) which was certified by the GIA. They then decided on two 0.27 carat princess diamonds to be set either side, of matching colour and clarity and with a combined diamond weight of 0.54carat.

As this customer lives in London, the ring was sent to them by special delivery.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Cushion & Pear Cut Diamond Trilogy Engagement Ring

,

A beautiful trilogy engagement ring using unusual cut diamonds - cushion and pear.

The customer wanted to develop a three stone diamond ring and the team at Form Bespoke Jewellers brought in a selection of diamonds varying in cut and size for the customer to choose from.

The decided on a stunning combination of a 0.52ct cushion cut centre diamond with 0.25ct pear cut diamonds either side, in perfectly matching F colour and VS2 quality totalling 1.02ct. Once this decision had been made, the final design for the ring was established and cast in platinum. Then the ring was hand set and finished in our Leeds Studio.

The simple setting allows the diamonds to speak for themselves!

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

 

Opening Hours:

Please contact us to book an appointment

Mon—Fri: 8:30am to 5:30pm

Saturday: by appointment only

 
 

TRADE ENQUIRIES

Trade work is not the main part of our business, but we are always open to suggestions. Please get in touch.