Engagement Ring, Halo, Cluster, Coloured Precious Stones
Tim Swann
18ct Yellow Gold and Platinum Sapphire Wed Fit ...
18ct Yellow Gold and Platinum Sapphire Wed Fit Cluster Engagement Ring
Engagement Ring, Trilogy
Tim Swann
18ct Yellow Gold and Platinum Diamond Trilogy ...
18ct Yellow Gold and Platinum Diamond Trilogy Engagement Ring
Engagement Ring, Trilogy
Tim Swann
18ct Yellow Gold Round Brilliant Cut Diamond ...
18ct Yellow Gold Round Brilliant Cut Diamond Trilogy Engagement Ring
Engagement Ring, Halo, Cluster
Tim Swann
18ct Yellow Gold Diamond Cluster Engagement Ring
18ct Yellow Gold Diamond Cluster Engagement Ring
Engagement Ring, Cluster, Coloured Precious Stones
Tim Swann
Platinum Teal Sapphire and Diamond Engagement ...
Platinum Teal Sapphire and Diamond Engagement Ring

18ct White Gold Diamond Set Eternity Ring

18ct White Gold Diamond Set Eternity Ring

This bespoke eternity ring follows the traditional design of being fully diamond set, i.e. with diamonds around the entire band. However, by choosing a flat court profile, the ring picks up a certain modern twist. The straight angles and neat positioning of the metal grains, creates a slick, contemporary finish. 

The diamonds are all round brilliant cut with matching colour and clarity. Again, this ensures a pristine finish to the ring. 

The customer chose for the ring to be cast in 18ct white gold. This provides a lovely complement to the diamonds.

A beautiful, bespoke eternity ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

Platinum Channel Set Diamond Eternity Ring

Platinum Diamond Channel Set Eternity Ring

This platinum eternity ring follows a traditional style, with a selection of diamonds set directly alongside each other as if they wrap right around the customer's finger. These 1.5mm princess cut diamonds are channel set over the top half of the band.

The platinum band was chosen to match the depth of the customer's engagement and wedding ring. It was then finished with a brushed finish for added detail.

A classic eternity ring with a contemporary twist.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

18ct Yellow Gold Diamond Half Eternal Style Eternity Ring

18ct Yellow Gold Diamond Cluster Eternity Ring

This design was created by Form Bespoke Jewellers and the customer requested that we cast it in 18ct Yellow gold and set it with diamonds.

At one stage the customer considered mixing in 8 x aquamarine gemstones, however the all diamond version was decided upon. To add a unique twist, the customer also chose to have the ring only half set with 16 x 1.7mm and 18 x 2mm round brilliant cut diamonds of G colour and SI clarity. This ring has a total combined diamond weight of 1.18 carats.

As with all the rings in our Eternal Range, you can decide to add a splash of colour by setting coloured precious stones into the design.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

18ct White Gold Fitted Eternity Stacker Ring

Diamond set fitted eternity ring

This customer wanted an eternity ring designing to follow the profile of her engagement ring and fitted wedding ring. The team at Form Bespoke Jewellers in Leeds developed the design to suit the proportions of the existing rings perfectly.

A model was then handmade in pewter, and once approved the model was cast in 18ct white gold with a high palladium content which his a whiter natural colour.

The eternity ring was then grain set with 12 x 0.01ct round brilliant cut diamonds, contrasting with the plain wedding band.

When worn together the rings are a perfect fit, creating a contemporary stacker ring. Each element fits perfectly together and is comfortable to wear.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

Platinum Round Brilliant Cut Diamond Set Eternity Ring

Platinum diamond set eternity ring

This is a lovely, tactile design that has been given that extra sparkle by clever grain setting.

This bespoke eternity ring boast three round brilliant cut diamonds that have been grain set. Grain setting involved lifting the metal in small "grains" around the stone to hold it in place. The metal is then highly polished giving it a sparkling illusion.

The platinum band was chosen to be wider than the diamonds ensuring a neat frame and tactile finish to the piece.

The customer was thrilled with their bespoke eternity ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

18ct Yellow Gold Diamond Set Eternity Ring

18ct yellow and white gold half-set diamond eternity ring

This ring was created for a couple wanting to renew their wedding vows.

Form proposed a series of options before the customer chose a 2.5mm 18ct yellow gold band, to be set with 11 x 2.3mm round brilliant cut diamonds with a combined diamond weight of 0.55 carat.

The ring was then hand finished and the diamond detail was further enhanced by having rhodium applied to the setting.

A truly beautiful ring to mark a very special and important relationship.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

Platinum Grain Set Diamond Eternity Ring

A platinum eternity ring with grain set diamonds

This is a lovely example of a traditional eternity ring, with diamonds set half way around the band.

Each petite, round brilliant cut diamond is grain set by hand and the platinum grains are then highly polished to create an additional sparkling illusion. All the diamonds are also of matching colour and clarity to ensure a flawless finish across the entire ring.

By leaving the bottom half of the ring unset, it ensures a comfort fit whilst also leaving room for the ability to do any re-sizing if necessary in the future.

The customer chose for their bespoke eternity ring to be cast in platinum which is a lovely design choice that complements the diamonds beautifully. 

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Platinum Diamond Set Milgrain Eternity Ring

,

Platinum Diamond set milgrain eternity ring

The customer came to us wanting a diamond set eternity ring. From here, with the help of our expert jewellers here at Form Bespoke Jewellers, it was decided that seven round brilliant cut diamonds would be channel set into a platinum band.

To add that extra unique detail, a millgrain frame was added around the diamond setting. A really effective extra touch!

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

,

Palladium and Yellow Gold Layered Gents Wedding Ring

,

A layered palladium and yellow gold gents wedding ring.

This contemporary wedding ring has a double-layered feature, showcasing a yellow gold base band topped with a slimmer palladium band. The layering rings create a soft step which adds an interesting tactile finish too.

Both metals have been finished and highly polished by our expert Yorkshire jewellers ensuring a sparkling contrast of colour.

A modern twist on a classic gents wedding ring.

Handmade at Form Bespoke Jewellers, Chapel Allerton, Leeds.

Please feel free to contact us if you have any questions regarding a commission.

,

Brushed Wedding Ring with Chamfered Edges

,

A contemporary wedding with a brushed finish and chamfered edges

The team at Form Bespoke Jewellers worked with the customer to create a bespoke design on this 6mm flat court profile platinum ring.

Weighing over 12.3 grams, the polished chamfered edges add a contrast to the brushed textured face of the ring.

Contemporary and masculine in its design, this ring feels and looks fantastic when worn.

This ring is also available in white gold, yellow gold and palladium.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Flat Court Gents Wedding Ring with Diamond Cut Lines

,

Flat Court gents Wedding ring with diamond cut lines

Flat court wedding rings prove to be quite popular here at Form Bespoke Jewellers. The 'flat' outer edge creates a stylish profile. The 'court' (rounded) shaping on the inside provides a comfort fit.

The customer chose to add an extra bespoke touch to his wedding ring. Two parallel engraved lines run around the entire circumference of the band. The engraved lines are highly polished as is the inside of the ring. To contrast, there is a brushed finish to the exterior of the ring; another stylish design choice by the customer.

The ring is cast in durable platinum. A cool and contemporary, textured and engraved, gents wedding ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

,

18ct White Gold and Rose Gold Gents Wedding Ring

,

White and Rose Gold Brushed and Polished Finish wedding ring

The customer came to us looking for a stylish twist on the classic plain wedding band. Alongside the guidance of our expert Yorkshire jewellers, this contemporary gents wedding ring design was created.

The ring boasts not one, but two precious metals! 18ct rose gold on the inside, to contrast 18ct white gold on the outside.

The rose gold interior is highly polished, which really brings out its warm rich tones. The white gold exterior has a brushed finish which creates a matte effect. We love this trendy contrast and the customer was thrilled with his ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

,

Palladium Textured Wedding Ring

,

silver Rustic gents wedding ring

The customer came to us with an image they had found on the internet of a silver ring with a rugged, worn finish. They were looking to recreate the design in a stronger precious metal with a few more personalised touches, to create a bespoke wedding ring.

After sitting down with one of our expert jewellers, they decided on a wide band that would be firstly designed on CAD, then worked on at the bench to create a more textured finished. Once the CAD design was approved, the wedding ring was cast into palladium, a durable metal of the platinum family but which is more cost effective.

Finally, rather than polishing the ring to a flawless finish, it was worked on by hand using a hammer and barrelling technique which created the dramatic uneven surface and brushed appearance. A unique and organic-looking wedding ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Palladium Gents Brushed Wedding Ring

,

The team at Form Bespoke Jewellers worked with the customer to create this brushed wedding ring design on a 6mm wide flat court palladium band.

The centre was recessed and a brushed texture was applied. The polished edges create a beautiful contrast and contemporary finish. This ring feels as good as it looks when being worn due to the court profile on the inside of the ring.

Form Bespoke Jewellers can help you create your perfect design on any wedding ring profile.

Form Bespoke Jewellers created this couples engagement and wedding rings and they were kind enough to send us a card to let us know what they thought of their rings; "We would just like to say a huge thank-you for all your help in designing and making my engagement ring and our beautiful wedding rings. They are everything we wished for and we will cherish them for ever!"

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

,

Flat Court Gents Wedding Ring with Rose Gold Inlay

,

Metal: Platinum, Rose Gold

Style: Textured

A bespoke flat court wedding ring with rose gold inlay.

This trendy gents wedding ring was designed by the customer alongside our expert Yorkshire jewellers.

The main part of the band has a flat court profile. This means that the outside is flat for a contemporary style, but the inside has a softened shape for a comfortable fit.

For additional detail, there is a slim rose gold inlay around the entire circumference of the ring. It is both off centre and highly polished. This contrasts the brushed finish which runs across the top side of the platinum band.

A stylish gents wedding ring. 

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

Diamond Fitted Wedding Ring for Two Stone Engagement Ring

Platinum diamond set bespoke made fitted wedding ring

The customer returned to us for a bespoke fitted wedding ring that would sit alongside their Platinum Diamond and Alexandrite Engagement Ring which we had already created for them.

As the engagement ring was a bold two stone infinity design, a fitted wedding ring allowed for the rings to fit perfectly alongside one another, with their profiles matching. 

The customer chose to have a round brilliant cut diamond rub set in the centre of the ring and a further four round brilliant cut diamonds set across both shoulders. This beautiful design detail really helps to frame the bold alexandrite and diamond in the engagement ring.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

18ct Diamond Set Fitted Wedding Ring

The perfect match and the perfect fit!

This customer asked us to help the create the perfect fitted wedding ring to sit against their unique shaped engagement ring which we had created for them.

Following a series of design consultations and model reviews the handmade pewter model was approved and then cast into 18ct white gold, and then fully set to one edge with 1.3mm diamonds.

The wedding ring looks like a traditional band ring when worn, but is actually shaped to fit against the engagement ring like a perfectly fitting jigsaw piece!

Made by Form Bespoke Jewellers in Chapel Allerton, Leeds

If you would like further information on this ring including pricing please email us

Please contact us to see what we can make for you.

The customer sent us a card to let us know what they thought of their ring;

Hi Tim, Thank you so much for my wonderful ring. I absolutely love it and have had so many compliments already.

The wedding ring you made fits perfectly with my engagement ring and now they look like they were always a set! Thanks also for putting up with me and my mum and helping us decide on the best design.

Hopefully one of my sisters will get married soon – we will contact you then!

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

Solitaire Diamond Set Fitted Wedding Ring

A rub set solitaire diamond finishes this fitted wedding ring perfectly.

The customer came to us for their engagement ring and wedding ring. After going through their ideas with our expert jewellers, a prototype of the engagement ring was made by hand for the customer to try on. Once approved it was then cast in the customer's chosen metal, platinum.

A big part of the design was to ensure that the solitaire princess cut diamond in the engagement ring was visible through the side of the setting allowing lots of light into the diamond which helps to ensure maximum sparkle.

With another princess cut diamond set into the wedding ring this ensures the pair have the perfect look together!

Both diamonds in the engagement ring and the wedding ring have been hand picked in Antwerp specially for the customer to ensure they match perfectly in colour and quality; F colour and VS 1 quality on an IGI diamond certificate.

Both the engagement and wedding ring also have exactly the same profile; court inside (for a comfortable fit) and a flat outer (sleek and contemporary). Both are also 4mm wide which really enhances the look of unity between them. 

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us for further information on this ring or to see what we can make for you.

18ct Diamond Set Fitted Wedding Ring

A wedding ring to fit a Marquise cut diamond engagement ring

After searching accross the UK, this couple travelled from Plymouth to our showroom in Leeds to create their fitted wedding ring. To read more about their experience please read our article.

The customer came to us with an engagement ring that they had bought elsewhere, and were looking to create a wedding ring. The Marquise diamond centre stone often requires a bespoke wedding ring, and the asymmetric wave shoulders added to this need for a fitted wedding ring.

The team at Form Bespoke Jewellers in Leeds worked though a variety of designs with the customer to create this style which fits perfectly against the marquise diamond. The customer decided to have the fitted wedding ring made in 18ct white gold and added 6 x 2mm brilliant cut diamonds to accents the wave shoulders, with a combined diamond weight of 0.21carats.

The customer sent us a card to let us know what they thought of their rings;

"To Tim, Thank you so much for making our wedding rings. We are ‘over the moon’ with them. I have had so many comments on my bespoke wedding ring-people always notice it.
Thank you for all the help and advice that you gave us. We really appreciate it. It was well worth the trip to Leeds! Hopefully I will be back sometime in the future for an eternity ring!"

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

Diamond Set Fitted Wedding Ring to Twist Engagement Ring

A diamond set fitted wedding ring handmade to sit perfectly alongside the customer's twist engagement ring.

As the engagement ring had a twisted shank, it meant that the profile of the ring had an unusual zigzag shape. Using pewter, our expert jeweller created a model of a fitted wedding ring that shaped neatly alongside the zigzag edge. The model was then sent to the casters to be cast into 18ct white gold to match the engagement ring,

Eight princess cut diamonds were then channel set into the top of the wedding ring, finishing at the some point as the engagement ring. Sat next to one another, the pair look like they were always meant to be together.

Handmade by Form Bespoke Jewellers in Chapel Allerton, Leeds, West Yorkshire.

Please Contact Us  for further information on this ring or to see what we can make for you.

 

Opening Hours:

Please contact us to book an appointment

Mon—Fri: 9am to 5:30pm

Saturday: by appointment only

 
 

TRADE ENQUIRIES

Trade work is not the main part of our business, but we are always open to suggestions. Please get in touch.